IoT Startup Set of Accessories Including Tool Set and PCBs

Equipment Description:
Technical Specifications:
Startup items must be provided with the followings for IoT Circuit Board Plotter:
 Drill Underlay Material FR4, 229 mm x 305 mm (9” x 12”), 2mm (Predrilled) – 10 Nos
 Base plate FR4, 229 mm x 305 mm (9” x 12”), 0/35 µm (Predrilled) – 10 Nos
 Base plate FR4, 229 mm x 305 mm (9” x 12”), 35/35 µm (Predrilled) – 5 Nos
 Special Tape – 1 No
 PCB cleaner – 3 Pcs
 Tools Nos in a box: Tool Nos 1/8” shaft with distance rings – 1 Nos should be quoted as a part of the startup Nos and
should Consist the following:
 Universal Cutter 1/8”, 36 mm, 0.2 – 0.5 mm (8 -20 mil) – 10 Nos
 Micro Cutter 1/8”, 36mm, 0.10 – 0.15 mm (4 – 6 mil) – 2 Nos
 End mill 1/8”, 36mm, d = 0.8mm – 1 Nos
 End mill 1/8”, 36mm, d = 1.00mm (39 mil) – 2 Nos
 End mill 1/8”, 36mm, d = 2.00mm (79 mil) – 2 Nos
 End mill long, 1/8”, 38mm, d = 1.00mm (39 mil) – 1 Nos
 End mill long, 1/8”, 38mm, d = 2.00 mm (79 mil) – 1 Nos
 Counter Router, 1/8, 38mm, d = 1.00mm (39 mil) – 2 Nos
 Counter Router, 1/8”, 38mm, d = 2.00 (79 mil) – 2 Nos
 Spiral Drill, 1/8”, 38mm, d= 0.40 (16 mil) – 2 Nos
 Spiral Drill, 1/8”, 38mm, d= 0.50 (20 mil) – 2 Nos
 Spiral Drill, 1/8”, 38mm, d= 0.60 (24 mil) – 2 Nos
 Spiral Drill, 1/8”, 38mm, d= 0.70 (28 mil) – 2 Nos
 Spiral Drill, 1/8”, 38mm, d= 0.80 (31 mil) – 2 Nos
 Spiral Drill, 1/8”, 38mm, d= 0.90 (35 mil) – 2 Nos
 Spiral Drill, 1/8”, 38mm, d= 1.00 (39 mil) – 2 Nos
 Spiral Drill, 1/8”, 38mm, d= 1.20 (47 mil) – 1 Nos
 Spiral Drill, 1/8”, 38mm, d= 1.40 (55 mil) – 1 Nos
 Spiral Drill, 1/8”, 38mm, d= 1.50 (59 mil) – 2 Nos
 Spiral Drill, 1/8”, 38mm, d= 1.60 (63 mil) – 1 Nos
 Spiral Drill, 1/8”, 38mm, d= 1.80 (71 mil) – 1 Nos
 Spiral Drill, 1/8”, 38mm, d= 2.00 (79 mil) – 2 Nos
 Spiral Drill, 1/8”, 38mm, d= 3.00 (118 mil) – 2 Nos