Multiple Instruments with PC Control Software
Product Name : Multiple Instruments with PC Control Software for IoT Devices/ Development Board
Model: LA-MIPCS
Technical Specifications:
Digital Storage Oscilloscope:
Bandwidth: 100 MHz
Channels: 2
Sample Rate: 1 GS/s or higher
Record Length: 20 K points or higher
Vertical system – Analog channels:
Vertical resolution: 8 bits
Input sensitivity range: 1 mV/div to 10 V/div max.
DC gain accuracy: ±3.0 % step gain or better
Maximum Input Voltage: 300 VRMS
Bandwidth limit: 20 MHz
Input coupling: DC, AC
Horizontal system – Analog channels:
Timebase accuracy: ±25 x 10-6 over any >1 ms interval
Timebase range: 2 ns/div to 100 sec/div
Trigger modes: Auto, Normal, Single Sequence
Trigger Types: Edge, Pulse Width, Runt
Waveform measurements: Cursors Time,
Waveform math: Arithmetic, FFT
Display Type: Minimum 7-inch TFT Color Display
Display Resolution: 800 horizontal by 480 vertical displayed pixels (WVGA)
Power source: 100 to 240 VAC RMS ±10%
Power source frequency: 45 Hz to 65 Hz (100 to
Power consumption: 30 W
Arbitrary Function Generator:
Sine frequency range: 1 μHz to 25 MHz or higher
Square Frequency range: 1 μHz to 20 MHz or higher
Ramp Frequency range: 1 μHz to 500 kHz or higher
Pulse Frequency range: 1 mHz to 20 MHz or higher
Pulse width: 16 ns to 999.99 s or higher
Pulse width resolution: 10 ps or better
DC Range: -5 V to 5 V or higher
Resolution: 1 mV or better
Accuracy: ± (1% of |Nosting | +1mV)
Noise Bandwidth (-3 dB): 150 MHz or higher
Noise type: White Gaussian
Modulation: AM, FM, PM, FSK, PWM
Internal modulating frequency: 1 mHz to 1 MHz or higher
Display: Minimum 9-inch capacitive touch screen with 800 * 480 resolution
Number of channels: 1
Run modes: Continuous, Modulation, Sweep and Burst
Output Characteristics:
Amplitude range (into 50 Ω): 1 mVP-P to 10`VP-P and (into open circuit or High-Z): 2 mVP-P to 20`VP-P
Accuracy: ± (1% of Nosting +1 mVP-P)
Resolution: 0.1 mVP-P, 0.1`mVRMS, 1`mV, 0.1`dBm
Power source: 100-240 V, 47-63 Hz
Consumption: 120 W
High Power 3-Channel Programmable Power Supply:
Number of Channel: 3
DC Output Rating (for CH 1 and CH 2)-
Voltage: 0 V to 30 V or higher
Voltage Limit: 30.1 V
DC Output Rating (for CH 3)-
Voltage: 0 V to 5 V or higher
Voltage Limit: 5.1 V
Current: 0 A to 3 A
Maximum power: 195 W
Load Regulation- Voltage: ≤0.01% + 3 mV and Current: ≤0.01% + 3 mA or better
Line Regulation- Voltage: ≤0.01% + 3 mV and Current: ≤0.01% + 3 mA or better
Ripple and Noise: Voltage: 3 mVpeak-peak
Resolution: Voltage: 1 mV or better; Current: 1 mA or better
Accuracy: Voltage: ≤0.03% + 10 mV or better; Current: ≤0.1% + 5 mA or better
Communications: USB, RS232
Display Vacuum fluorescent display
Memory 36 Nosup memories
Power Source: 220 V AC Nosting: 198 VRMS to 264 VRMS, Frequency: 50 Hz, Consumption: 700 VAC
Digital Multimeter:
15 measurement functions
5-inch (12.7 cm) multi-touch capacitive touchscreen with graphical display
Internal memory; store up to 7 million readings
Standard USB-TMC and LXI/Ethernet communication Interfaces
USB host port for storing readings, instrument configurations, and screen images
Cooling Forced air, fixed speed
DC Voltage Range: 100 mV, 1V, 10V, 100V, 1000V or higher
DC Voltage Resolution: 100nV ~ 1mV or better
Resistance Range: 1, 10, 100, 1k, 10k, 100k, 1M, 10M, 100M Ω or higher
Resistance Resolution: 1 μΩ ~ 100 Ω or better
DC Current Range: 10 μA ~ 10 A or higher
DC Current Resolution: 10pA ~ 100 μA or better
AC Voltage Range: 100mV ~ 750V or higher
AC Voltage Resolution: 100nV ~ 100 μV or better
AC Current Range: 100 μA ~ 10 A or higher
AC Current Resolution: 100pA ~ 10 μA or better
Frequency and Period Range: 3Hz ~ 300 kHz or higher and 333 ms ~ 3.3 μs or higher
Capacitance Range: 1 nF ~ 100 μF or higher; Resolution: 0.1 pF ~ 10 nF or better
Digitize DC Voltage Range: 100 mV ~ 1000 V or higher; Resolution: 10 μV ~ 100 mV or better
Power Supply: 220 V, 50 Hz
Power Consumption: 50 VA
Instrument Control Software:
A software for the PC that enables quick test Nosup and data visualization when using multiple instruments should have
the following features:
Save time by automating data collection of millions of readings.
Nos up a multi-instrument test with the ability to independently control up to eight instruments.
Supports source measure unit (SMU) instruments, DMMs, power supplies, oscilloscopes, arbitrary function generators
(AFGs), dataloggers, and sensitive instruments.
Replicate tests quickly using saved test configurations.
Use built-in plotting and comparison tools to quickly discover measurement anomalies and trends.
Auto-export data in ready-to-use .csv and .xlsx formats for reports and additional analysis.
Applications-
Device characterization: Characterize materials and discrete components and verify design of electronic modules.
Data logging: Reliably log data to the PC; useful for testing device compliance to regulatory or industrial standards.